How to choose cabinets starts with details

2022-07-22
  • Detail

In home decoration, cabinet belongs to the part that needs to be considered earlier. Because its production cycle is long, cabinet manufacturers are often required to enter the site for measurement after pasting tiles in the kitchen. The survey found that many decoration owners are very tangled when choosing countertops for the kitchen. They do not know whether it is better to choose artificial stone, stainless steel or natural stone

cabinets are a very important part of kitchen decoration. As we all know, there are quite a lot of messy items in the kitchen, and the role of cabinets is to just put these items in order to make the kitchen look cleaner. This is why many friends decorate cabinets for the kitchen now

how to select cabinets

1. Look at the edge banding of plates

the edge banding of high-quality cabinets is fine, smooth, and feels good. The sealing line is straight and smooth, and the joint is fine. Professional manufacturers use linear edge banding machine to complete the processes of edge banding, end breaking, edge trimming, chamfering, polishing, etc. at one time, the gluing is uniform, and the pressure of pressing and pasting edge banding is stable, ensuring the most accurate size. However, small workshops use brushes to apply glue, manually press and seal edges, use castor knives to repair edges, and use manual polishing machines to polish. Due to uneven pressure, many places are not firm, and formaldehyde and other toxic gases will volatilize into the air

2. Look at punching

nowadays, panel furniture is assembled by three in one connectors, and the matching and accuracy of the hole position will affect the structural firmness of the cabinet. Professional manufacturers use multiple rows of drills to complete several holes on the edge and surface of a board at one time. These holes are a positioning benchmark, and the dimensional accuracy is guaranteed

3. Look at the cutting board

cutting board is the first process of cabinet production. Large professional enterprises use electronic cutting saws to input processing dimensions through computers, which control the dimensional accuracy of material selection, and can process several plates at a time. The performance of the equipment is stable. The dimensional accuracy of the plates produced is very high, the tolerance unit is in microns, and there is no stubble on the edge of the plates

4. Look at the door panel

the door panel is the face of the cabinet, which is as important as the human face. Door panels produced by small factories are prone to moisture and deformation due to improper treatment of base materials and surface processes

5. Look at the assembly effect of the whole set of cabinets

any dimensional error in the production process will be reflected in the door panel. The door panel produced by professional large factories is horizontal and vertical, and the gap between the doors is uniform, while the door panel produced by small factories will have uneven door seams, uneven gap, and large and small

6. Look at the slide rail of the drawer

although it is a small detail, it is an important part that affects the quality of the cabinet. Due to the size error of the hole position and the plate, there is an error in the installation size of the slide rail, resulting in the drawer pulling is not smooth or the left and right are loose. Pay attention to whether the drawer gap is even

how to choose cabinet hardware

1. Hinge

hinge (also known as hinge) in the process of frequent opening and closing of cabinet door panels at ordinary times, the hinge is probably the most tested. At present, the familiar brands include Hettich, Blum, Hafele, etc

in terms of hinges, German Heidi poetry is obviously better than haifule, which is now flooding everywhere, and haifule's is divided into joint venture and domestic: the one with two points on a in the six letters (Hafele) is joint venture, and the quality is OK. And three letters “ HFL” Others are made in China with average quality

2. Drawer track

another major component of cabinet hardware is drawer track. The quality of drawer guide rail depends on the difference of material, principle, structure, equipment and production process. As long as you pay a little attention, you can feel the quality of the track by pulling the drawer

3. Cabinet door handle

another cabinet hardware is the cabinet door handle, which mainly depends on the weight, thickness and coating quality

4. Sink and faucet

common cabinet sinks are mainly made of stainless steel, artificial stone or ceramics, among which stainless steel sink is the sink with the highest market share

editor's summary: that's all for how to select cabinets. I hope it will be helpful to you. If you want to know more about it, you can pay attention to the information

潍坊银屑病医院

太原男科医院

成都外阴白斑医院

Copyright © 2011 JIN SHI